Forklift truck
Contents |
[edit] Introduction
Forklift trucks are used to transport materials and goods on pallets or packs, and are able to move them both horizontally and vertically. They are most suited to use on firm and level ground, and so are common in warehouses and on industrial sites, but they are generally designed to operate in poorer conditions as well and so can be used on construction sites.
On construction sites, they are predominantly used as part of the materials and goods storage process, or for moving materials and goods where the height of the structure does not exceed three storeys.
[edit] Types of forklift truck
The common features of forklift trucks include their engine, the driver’s cab, and the lifting forks.
The selection of the appropriate type of forklift truck will depend on considerations such as:
- The load and lifting height required.
- The use of attachments (such as fork extensions, booms, rotating heads, drum clamps, paper roll clamps, bale clamps, load stabilisers and so on).
- Available power sources (electric batteries, liquefied petroleum gas (LPG), petrol or diesel).
- The terrain.
- The need to protect the operator.
- Exposure to the weather.
- The need for lighting.
- Noise restrictions.
There are three basic types of forklift truck:
[edit] Straight mast forklift
This has a telescopic straight mast that extends vertically, typically with a maximum lift height of 5.7 m, a maximum forward tilt of 3-degrees and a maximum backward tilt of 10-degrees. This type of forklift is capable of lifting 1.5 tonnes.
[edit] Telescopic boom forklift
This has a telescopic boom that is able to reach forwards 3.35 m and has a maximum lift height of 8.5 m. The maximum load is 2 tonnes.
[edit] Overhead forklift
This has a hydraulically controlled overhead lifting arm that is able to reach forwards 2.35 m and has a maximum lift height of 6.5 m. The maximum load is 1.5 tonnes.
[edit] Health and safety
According to the Health and Safety Executive (HSE), forklift trucks are involved in about a quarter of all workplace transport accidents.
HSE has published ‘Rider-operated lift trucks: Operator training and safe use, Approved Code of Practice and guidance’ (known simply as ‘L117’) intended for employers and those responsible for the safe operation of lift trucks, as well as those in control of worksites, the self-employed, managers and supervisors.
It includes:
- The main legal requirements relating to lift trucks.
- The Approved Code of Practice.
- Guidance on operator training for stacking rider-operated lift trucks.
- Guidance from HSG6 Safety in working with lift trucks, which it replaces.
The Management of Health and Safety at Work Regulations require that a suitable and sufficient risk assessment is undertaken to protect employees and others, and this is an important part of planning lifting operations. Other obligations include; providing training, proper maintenance and inspection, provision of suitable operating areas and suitable loads, and so on.
Particular care must be taken by operatives to ensure that loads are placed correctly on forks prior to lifting, that the forklift truck is not overloaded, and to reduce the crossing of operating areas with other transport and pedestrian routes.
Other relevant legislation includes:
- Health and Safety at Work etc Act.
- Provision and Use of Work Equipment Regulations (PUWER).
- Lifting Operations and Lifting Equipment Regulations (LOLER).
- Workplace (Health, Safety and Welfare) Regulations.
- Control of Substances Hazardous to Health Regulations (COSHH).
- Construction (Design and Management) Regulations (CDM).
Read about other types of construction plant here.
[edit] Related articles on Designing Buildings
- Back actor.
- Bituminous mixing and laying plant.
- Cherry pickers.
- Compressed air plant.
- Concreting plant.
- Construction plant.
- Construction tools.
- Crane supports.
- Earth-moving plant.
- Equipment in buildings.
- Excavating plant.
- Hoist.
- Lift table.
- Lifting device.
- Lock out tag out LOTO.
- Pallet jack.
- Post lift.
- Road sweeper.
- Scaffolding.
- Scissor lift.
- Stacker.
- Types of crane.
[edit] External references
- Fork Lift Truck Association
- ‘Building Construction Handbook’ (6th ed.), CHUDLEY, R., GREENO, R., Butterworth-Heinemann (2007)
- Major Causes Of Forklift Accidents
Featured articles and news
Shortage of high-quality data threatening the AI boom
And other fundamental issues highlighted by the Open Data Institute.
Data centres top the list of growth opportunities
In robust, yet heterogenous world BACS market.
Increased funding for BSR announced
Within plans for next generation of new towns.
New Towns Taskforce interim policy statement
With initial reactions to the 6 month policy update.
Heritage, industry and slavery
Interpretation must tell the story accurately.
PM announces Building safety and fire move to MHCLG
Following recommendations of the Grenfell Inquiry report.
Conserving the ruins of a great Elizabethan country house.
BSRIA European air conditioning market update 2024
Highs, lows and discrepancy rates in the annual demand.
50 years celebrating the ECA Apprenticeship Awards
As SMEs say the 10 years of the Apprenticeship Levy has failed them.
Nominations sought for CIOB awards
Celebrating construction excellence in Ireland and Northern Ireland.
EPC consultation in context: NCM, SAP, SBEM and HEM
One week to respond to the consultation on reforms to the Energy Performance of Buildings framework.
CIAT Celebrates 60 years of Architectural Technology
Find out more #CIAT60 social media takeover.
The BPF urges Chancellor for additional BSR resources
To remove barriers and bottlenecks which delay projects.
Flexibility over requirements to boost apprentice numbers
English, maths and minimumun duration requirements reduced for a 10,000 gain.
A long term view on European heating markets
BSRIA HVAC 2032 Study.
Humidity resilience strategies for home design
Frequency of extreme humidity events is increasing.
National Apprenticeship Week 2025
Skills for life : 10-16 February
Comments